No products
ATIS 0600010.03 2011 Edition, July 2011 Heat Dissipation Requirements...
SAE AMS4407A Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged standard by SAE International, 03/23/2018
SAE AMS4372 Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T34) Solution Heat Treated and Stress Relieved standard by SAE International, 03/23/2018
SAE AMS4299A Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged standard by SAE International, 03/23/2018
SAE AMS4256C Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated standard by SAE International, 03/23/2018
SAE AMS4095D Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved standard by SAE International, 03/23/2018
SAE AMS4094D Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated standard by SAE...
SAE AMS3337F Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75 standard by SAE International, 03/23/2018
SAE AMS3334F Silicone Rubber Extreme Low-Temperature Resistant 35 - 45 standard by SAE International, 03/23/2018
SAE AMS4633B Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50) standard by SAE International, 03/20/2018
SAE MA5405B Splices, Fiber Optics, For Aerospace Inter-Connection Systems (Stabilized: Mar 2018) standard by SAE International, 03/18/2018
SAE AS157H HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT standard by SAE International, 03/18/2018
SAE AS158H HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT standard by SAE International, 03/18/2018