No products
IEC 62196-2 Revision 2.0, February 2016 IEC 62196-3 Revision 1.0, June 2014 IEC 61851-21-1 Revision 1.0, June 2017 IEC 61851-21-2 Revision 1.0, April 2018
ISO PAS 11154 1st Edition, December 15, 2006 Road vehicles Roof load carriers
IEC 60050-845 2nd Edition, December 2020 International electrotechnical vocabulary (IEV) – Part 845: Lighting
ATIS 0600010.03 2011 Edition, July 2011 Heat Dissipation Requirements for Network Telecommunications Equipment
ASME V&V 40 2018 Edition, November 19, 2018 Assessing Credibility of Computational Modeling Through Verification and Validation: Application to Medical Devices
Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements
AS IEC 61000.4.1:2017 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Overview of the IEC 61000-4 series standard by Standards Australia, 01/01/2017
AS IEC 60601.1.6:2017 Medical electrical equipment - General requirements for basic safety and essential performance - Collateral standard: Usability standard by Standards Australia, 01/01/2017
AS IEC 61000.4.5:2017 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Surge immunity test standard by Standards Australia, 01/01/2017
AS IEC 61000.4.6:2017 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields standard by Standards Australia, 01/01/2017
AS IEC 61000.6.5:2017 Electromagnetic compatibility (EMC) - Generic standards - Immunity for equipment used in power station and substation environment standard by Standards Australia, 01/01/2017
AS IEC 61078:2017 Reliability block diagrams standard by Standards Australia, 01/01/2017
AS ISO 14289.1:2017 Document management applications - Electronic document file format enhancement for accessibility - Use of ISO 32000-1 (PDF/UA-1) standard by Standards Australia, 01/01/2017
AS ISO 19005.2:2017 Document management - Electronic document file format for long-term preservation - Use of ISO 32000-1 (PDF/A-2) standard by Standards Australia, 01/01/2017
CSA Z662:19 Oil and gas pipeline systems standard by CSA Group, 06/01/2019
UNE 23723:1990 REACTION TO FIRE TEST OF BUILDING MATERIALS. ELECTRICAL BURNER TEST USED FOR FLEXIBLE MATERIALS 5 MM THICK OR LESS.
CSA G40.20-98/G40.21-98 General Requirements for Rolled or Welded Structural Quality Steel/Structural Quality Steel standard by CSA Group, 03/21/2000
AS/NZS 3002:2008 Electrical installations - Shows and carnivals standard by Australian/New Zealand Standards, 01/01/2008
ATIS 0600010.03 2011 Edition, July 2011 Heat Dissipation Requirements for Network Telecommunications Equipment
ASHRAE 28-1996 (RA2020) Standard 28-1996 (RA2020) -- Method of Testing Flow Capacity of Refrigerant Capillary Tubes (ANSI Approved) STANDARD by ASHRAE, 2020
DIN 59200 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass standard by Deutsches Institut Fur Normung E.V. (German National Standard), 05/01/2001
BS EN ISO 9664 95th Edition, February 21, 2019 Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear
Description / Abstract: ISO 7932, 3rd Edition, June 15, 2004 - MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - HORIZONTAL METHOD FOR THE ENUMERATION OF PRESUMPTIVE BACILLUS CEREUS - COLONY-COUNT TECHNIQUE AT 30 DEGREES C There is no abstract currently available for this document
ISO DIS 23776 2020 Edition, December 2, 2020 Meat and meat products — Determination of total phosphorous content
UL 199 12th Edition, April 28, 2020 UL Standard for Safety Automatic Sprinklers for Fire-Protection Service
UL 2167 2nd Edition, March 9, 2021 UL Standard for Safety Water Mist Nozzles for Fire Protection Service
UNE-CEN/TR 1459-6:2015 Rough-terrain trucks - Safety requirements and verification - Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck (Endorsed by AENOR in October of 2015.)
UNE-HD 632 S3:2016 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) (Endorsed by AENOR in November of 2016.)
UNE-CEN/TR 12896-9:2016 Public transport - Reference data model - Part 9: Informative documentation (Endorsed by AENOR in May of 2016.)